Connecting the Eiffel Deluxe to the Atari ST, new revision is ready I already had been asked if it was possible to connect the Eiffel deluxe to the Atari ST. Theoretically this should be no problem, and since i received a new revision PCB of the Eiffel deluxe, that had…
Price : 20,00 euros 30,00 euros Description : The MSX PS/2 Mouse Interface makes it possible to easily connect a PS/2 mouse to your MSX. Including a black (refurbished) PS/2 mouse (various brands / models) MSX PS/2 mouse Adapter for the MSX computer There are only a few MSX mice…
Price : 15,00 euro Description : The MSX Sega Mega D-Pad Adapter makes it possible to connect a Sega Megadrive D-pad Controller to your MSX. MSX Sega Mega D-Pad Adapter including housing A number of different models of D-pad controllers have been marketed by Sega for the Sega Megadrive (II)….
Price : 12,50 euro Beschrijving : Gotek FMTowns Interface Gotek FMTowns Interface : This is an Interface to easily enable the use of a Gotek floppydrive instead of the usual disk drive in an FMTowns machine. I have no experience with these machines myself, but was asked if I could…
Gotek external Interface with Duo Gotek drives connected to the Amiga In the time that I was busy designing and testing the Boot Selector for the Amiga 600 / 1200 I tested quite a few configurations before I had what I had in mind. With the knowledge I gained I…
Available Now !! Snap, the Atari ST USB Power Cartridge Available as of today : SNAP, the Atari ST USB Power cartridge, a concept that was not entirely my own idea, but which I designed and built myself. The cartridge has 2 USB connections and can therefore provide all kinds…
Price : 12.50 euros Description : Gotek 26pin Interface (Armstrad CPC664, CPC6128, Spectrum +3) Gotek 26pin Interface (Armstrad CPC664, CPC6128, Spectrum +3) : This is an Interface to use a Gotek drive instead of the usual disk drive in your Armstrad CPC664, CPC6128 or the Spectrum +3. I have no…
Internal Gotek FDD Swap adapter for the Atari ST The ‘men of Atari’ have cut back on internal connectors on the motherboard of the Atari ST line, both for the Floppy data cable and the Floppy power cable. These are soldered directly to the motherboard and in many cases are…
Gotek IDC-2-CardEdge adapter There are a number of systems that are not equipped to connect a Gotek drive as standard. Previously, many systems only had 5.25 inch floppy drives, these floppy drives do not have a 34 pin header but an Edge Connector (PCB contacts), so that is not easy…
Atari ST External Gotek Floppydrive Emulator Adapter. In the preparatory phase I have built and tested a total of 5 External Gotek adapters for the Atari ST. Based on the experiences I have gained with it, the design has been refined several times, but it now seems that the current version…