Installing A Gotek For Dummies is intended for those people who have absolutely no or very little experience with installing a Gotek Floppy drive emulator or with (Computer) Hardware in general. So you’re thinking about purchasing a Gotek drive (or maybe you already have one) and you want to try…
Price Description 27,50 Euro Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) with vertical (standing) 44 pin connector 47,50 Euro Amiga 500 / 500+ IDE Interface 44pin kit, with directly attached IDE-2-CF adapter and pre-installed 256MB CF card Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) This is…
What is an Amiga Boot Selector : This interface makes it possible to use an externally connected Disk Drive (or Gotek Floppy Drive Emulator) as a boot disk. This is made possible by making the amiga believe that the external drive is DF0: (Kickstart 2 and newer also have this…
Amiga 500 Internal IDE Interface options, possibilities : I spent quite some time designing and determining the best footprint for a Gotek.nl IDE interface for your Amiga 500 / 500+. The reason for this is that there are various revisions of the Amiga 500, all with their own layout, roughly…
Installing a Gotek floppy drive in Atari-ST This weekend I fitted one of my Atari’s (Atari-STe 1040 with 2 mb) with a gotek drive with Flashfloppy . I now know what needs to be done to install the Gotek Floppydrive without any problems. The models in the Atari-ST family have…
Great, you’ve seen part 1 of the KickstartSwitch story, and are now wondering what it takes to actually build a Kickstartswitch into your Amiga 500 / 600 / 2000. Note 1: This description is based on an Amiga 500, the Amiga 600 and 2000 are functionally similar, differences are in the way…
Installation of a Amiga Boot Selector in your A500 / A2000. Great, you’ve seen part 1 of the Amiga Boot Selector story, and are you are now perhaps wondering what it takes to build in a Boot Selector into your Amiga 500 / 2000. Note 1: this description is based on…
Amiga IDE interface functionality Further explored The weather has been so bad the past few days that I finally had the time to put the IDE interface to the test and to test the extensive possibilities myself. Of course the interface already worked fine in the basic setup, but theoretically…
Suppose you want to install an Amiga 2000 Internal IDE Interface in your A2000, what are the possibilities? I spent a lot of time designing and determining the best footprint for a Gotek.nl IDE interface for your Amiga 2000. The reason for this is that there are several revisions of…
Inleiding Amiga IDE FAQ (Frequently Asked Questions) Over time, The IDE interface has gone through quite a number of revisions, but the questions about the IDE interface have generally remained the same. I’m going to try to cover some of those frequently asked questions in this Amiga IDE FAQ. But…