External Gotek Floppydrive in Amiga look, with a 0.96 Oled Display External Gotek Floppydrive with a 0.96 Oled Display, Rotary Encoder and a Buzzer. Comes with a special case design alike the wedge models Amiga (Available in Beige or White)
Internal Gotek Floppydrive with Oled for the Amiga 500 / 600 / 1200 These Goteks have a special designed diskbracket that makes installing a Gotek into your amiga an easy task. No need to modify your precious Amiga , this is a 1 on 1 replacement.
![Gotek Floppy Internal Amiga 500 [Close Up of the 0.91 Oled]](https://www.gotek-retro.eu/wp-content/uploads/2023/07/Gotek_Retro_IMG_6829-250x150.jpg)
Price Description 52,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 500 / 500+. Assembly is simple and can be done without drilling or modifying the Amiga or Gotek. Version : Oled 0.91″ display and buzzer Colors : Amiga 500 Beige,…
Price : 7,00 Euro A 3D printed Amiga 500 Expansion Port Cover. The lid is printed in PLA + in a color that is quite close to an original undiscolored Amiga 500. The Amiga 500 expansion port cover is the same size as the original and fits perfectly in an…
Pistorm with a CD-ROM drive Recently one of the people that bought an IDE interface for his Amiga 500+ contacted me because he couldn’t get his Pistorm with a CD-ROM drive setup, up and running. From experience i knew that i had it working at some time, but did not…
Price Description 15,00 Euro Amiga Internal PC Floppydrive interface, allows you to replace the original Floppydrive with a unmodified PC Floppydrive. Amiga Internal PC Floppydrive interface . Many Amiga disk drives have lost their lives over the years, and over the years it became more and more difficult to get…
Price Description 35,00 Euro Amiga 500 / 500+ External IDE Interface 40pin with a beige housing in Amiga 500 look. 55,00 Euro Amiga 500 / 500+ External IDE Interface 40pin Kit, with direct-attached IDE-2-CF adapter and pre-installed 512MB CF card 7,50 Euro Upgrade from 512MB CF card to 1 GB…
Price : 10,00 Euro A 3D printed A1200 Trapdoor cover for the Amiga 1200. The Trapdoor lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500. The Trapdoor cover for the Commodore A1200 is the same size as the original trapdoor…
Price : 10,00 Euro A 3D printed A1200 Ventilated Trapdoor member. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500. The Trapdoor cover with honeycomb vents for the Commodore A1200 is the same size as the original trapdoor cover,…
Price : 10,00 Euro A 3D printed A600 Trapdoor Cover. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500. The Trapdoor cover for the Commodore A600 is the same size as the original trapdoor cover, and fits perfectly in…