Price Description 70,00 Euro External Gotek Floppydrive in Amiga design with a 1.3 Oled display, Rotary Encoder and Buzzer External Gotek in Amiga design with 1.3 Oled display, Rotary and Buzzer I wanted to create a design that, as an external Gotek, would be more suitable for the wedge-sized Amiga…
Price Description 30,00 Euro OAS, The Open Amiga Sampler (Mono), Including 3D printed case (Available in Beige and Black). OAS, The Open Amiga Sampler, Introduction This is an 8-bit sound sampler for use with your Commodore Amiga. The Open Amiga Sampler connects to the parallel port. I designed the 3D…
Installation of a Amiga Boot Selector in your A500 / A2000. Great, you’ve seen part 1 of the Amiga Boot Selector story, and are you are now perhaps wondering what it takes to build in a Boot Selector into your Amiga 500 / 2000. Note 1: this description is based on…
Price Description 2,50 Euro Screw set Amiga 500 Screw set Amiga 500 If you buy a second-hand Commodore Amiga 500 nowadays , there is a good chance that screws are missing or have been replaced by screws that do not fit or poorly fit. The screws on the front of…
Price Description 35,00 Euro Amiga 500 512KB Memory Expansion with Clock (RTC) 2,50 Euro Optional on/off switch with +/- 20 cm connection cable. Amiga 500 512KB Memory Expansion with Clock . Doubles the memory of your amiga 500 from 512KB to 1MB. The Amiga 500 512KB Memory Expansion with Clock…
Price Description 27,50 Euro Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) with vertical (standing) 44 pin connector 47,50 Euro Amiga 500 / 500+ IDE Interface 44pin kit, with directly attached IDE-2-CF adapter and pre-installed 512MB CF card 7,50 Euro Upgrade from 512MB CF card to 1 GB CF…
What is an Amiga Boot Selector : This interface makes it possible to use an externally connected Disk Drive (or Gotek Floppy Drive Emulator) as a boot disk. This is made possible by making the amiga believe that the external drive is DF0: (Kickstart 2 and newer also have this…
Price Description 30,00 Euro AMiDi, the Amiga Midi Interface, with Midi In, Midi Out and Midi Thru ports. AMiDi, the Amiga Midi interface, introduction Unlike the Atari, the Amiga does not have standard Midi connections, a missed opportunity as it turned out. One of the things where Atari had a…
Amiga 500 Internal IDE Interface options, possibilities : I spent quite some time designing and determining the best footprint for a Gotek.nl IDE interface for your Amiga 500 / 500+. The reason for this is that there are various revisions of the Amiga 500, all with their own layout, roughly…
Great, you’ve seen part 1 of the KickstartSwitch story, and are now wondering what it takes to actually build a Kickstartswitch into your Amiga 500 / 600 / 2000. Note 1: This description is based on an Amiga 500, the Amiga 600 and 2000 are functionally similar, differences are in the way…