The latest version of the internal IDE interface for the amiga 500 / 500+ is ready. What is the difference with the other adapters that are already available? – 44 pin IDE connection – power supply via IDE connector – No cables (no power and no IDE) if the correct…
Price Description 7,00 Euro IDE-2-CF Compact Flash Adapter (40 Pin, Male, Vertical) Connect to a mainboard or IDE controller with a 40 pin IDE cable IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE / ATA interface and do you want to use a Compact Flash Card…
Price Description 17,50 Euro Amiga Kickstart Switch for the A500 / 500+ / 600 / 2000 with a smal footprint. Includes switch with +/- 20 cm connection cable. Amiga Kickstart switch This interface was designed by me and is intended for the Amiga’s of type 500 / 500+ / 600…
Price Description 17,50 Euro DF0: – DF2: Buffered boot selector for the Amiga 2000 (DF1: or DF2: supported Device ID by setting 3 Jumpers). Including boot selector switch with +/- 30 cm connection cable. Buffered DF0: – DF2: Bootselector for the Amiga 500/2000. The buffer ensures that switching from DF0:…
The Open Kickstart interface is designed by SukkoPera and is buffered, intended for the Amigas of the type 500 / 500+ / 600 / 2000. The Low profile kickstart switch is especially for those modelss that need a lower profile (A500 Rev. 6a) or because there is additional hardware giving…
Price Description 7,00 Euro IDE-2-CF Adapter (40 Pin, Female, Power over IDE support, Horizontal) Can be directly attached to a Connect to a mainboard or IDE controller. IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE/ATA interface and do you want to use a Compact Flash Card…
What is a Kickstart Switch : The kickstart switch allows you to use, for example, a kickstart 2.05 or 3.1 in addition to your kickstart 1.3. The older amiga types still worked with Kickstart 1.2 and 1.3 , a lot of the Amiga software was written and tested during and…
Price : 17.50 euros 30.00 euros Description : Buffered OpenKickstart Switch for the Amiga 500/600/2000 Including switch with +/- 20 cm connection cable. As above with a rom with 1 kickstart and a Diagrom 1.21 for Amiga 500 (plus) / 600 / 2000 The Amiga OpenKickstart Switch is a buffered…
Price : 15.00 euros Description : Buffered Amiga BootSelector for the A500 / 2000 (Boot Device choice by means of Jumper or Switch with +/- 20 cm connection cable. Buffered Amiga Boot Selector for the A500 / 2000. The buffer ensures that the switching from DF0: to DF1: (And vice…
Prijs : 3.99 euro Onderdelen : ThroughHole. Moeilijkheids graad : 1 Dit PCB is mijn interpretatie van het oorspronkelijke Amiga Bootselector ontwerp door Jussi Kilpelainen. Geen enkel SMD Component, en de optie om ook van DF2: te kunnen booten. Het gaat hier om een gebufferde DF0: – DF1: of DF0:…