Price Description 2,50 Euro Screw set Amiga 500 Screw set Amiga 500 If you buy a second-hand Commodore Amiga 500 nowadays , there is a good chance that screws are missing or have been replaced by screws that do not fit or poorly fit. The screws on the front of…
![Gotek Floppy Internal Amiga 500 [Close Up of the 0.91 Oled]](https://www.gotek-retro.eu/wp-content/uploads/2023/07/Gotek_Retro_IMG_6829-250x150.jpg)
Price Description 52,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 500 / 500+. Assembly is simple and can be done without drilling or modifying the Amiga or Gotek. Version : Oled 0.91″ display and buzzer Colors : Amiga 500 Beige,…
Price : 7,00 Euro A 3D printed Amiga 500 Expansion Port Cover. The lid is printed in PLA + in a color that is quite close to an original undiscolored Amiga 500. The Amiga 500 expansion port cover is the same size as the original and fits perfectly in an…
Pistorm with a CD-ROM drive Recently one of the people that bought an IDE interface for his Amiga 500+ contacted me because he couldn’t get his Pistorm with a CD-ROM drive setup, up and running. From experience i knew that i had it working at some time, but did not…
Installation of a Amiga Boot Selector in your A500 / A2000. Great, you’ve seen part 1 of the Amiga Boot Selector story, and are you are now perhaps wondering what it takes to build in a Boot Selector into your Amiga 500 / 2000. Note 1: this description is based on…
Price Description 35,00 Euro Amiga 500 / 500+ External IDE Interface 40pin with a beige housing in Amiga 500 look. 55,00 Euro Amiga 500 / 500+ External IDE Interface 40pin Kit, with direct-attached IDE-2-CF adapter and pre-installed 256MB CF card Amiga 500 / 500+ External IDE Interface 40pin For those…
Price : 10,00 Euro A 3D printed A1200 Trapdoor cover for the Amiga 1200. The Trapdoor lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500. The Trapdoor cover for the Commodore A1200 is the same size as the original trapdoor…
Price : 10,00 Euro A 3D printed A1200 Ventilated Trapdoor member. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500. The Trapdoor cover with honeycomb vents for the Commodore A1200 is the same size as the original trapdoor cover,…
Price : 10,00 Euro A 3D printed A600 Trapdoor Cover. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500. The Trapdoor cover for the Commodore A600 is the same size as the original trapdoor cover, and fits perfectly in…
Price : 10,00 Euro A 3D printed A600 Ventilated Trapdoor lid (Creme coloured). The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500. The Trapdoor lid with ventilation slots for the Commodore A600 is the same size as the original…