:All Products

Price Description 13,50 Euro The Amiga 'RGB to VGA' adapter makes it possible to connect a VGA (LCD) monitor* to your amiga. This Adapter is a replica of the Original Commodore VGA Sync Adapter, but uses a modified DB23 connector ...

Price Description 6,50 Euro New Female DB23 connector, original 23 pin SubD connector for the Amiga Videoport . 2,50 Euro Shell for the DB23, complete with screw set (3D printed shell) Amiga DB23 Female connector It has been ...

Price Description 12,00 Euro Sony HitBit Premium Composite Scart cable with 6 pin DIN plug, for the Sony HitBit family.
Sony HitBit Premium Composite Scart cable for the Sony Hitbit family. The Hitbit family of Sony MSX home ...

Price Description 12,00 Euro VG8020 Premium Composite Scart cable with an 8 pin DIN plug, for a Philips VG8020 / 8010 / 8000
VG8020 Premium Composite Scart cable for the VG8XXX MSX family. The VG8xxx family of Philips ...

Price Description 12,00 Euro Premium OFC Composite video cable with a 5 pin DIN plug, for the Commodore 64. This cable can also be used for most of the Atari 8bit machines Composite video cable for the Commodore ...

Read More

Price Description 52,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 600.
Assembly is simple and can be done without drilling or modifying the amiga or Gotek. Version : Oled 0.91″ ...

Read More

Price Description 52,50 Euro Gotek Floppy internal Amiga 1200 comes with 0.91 Oled Display and buzzer, with bracket for internal mounting in an Amiga 1200.
47,50 Euro Gotek Floppy internal Amiga 1200 with standard 3 Digit Display and Buzzer, with ...

Price Description No Longer Available Shop : Amiga 500 / 500+ IDE Interface DOM Kit (68000 Socket), Includes a pre-installed 1GB DOM.
Amiga 500 / 500+ IDE Interface DOM Kit (68000 Socket) This is a special 44 pin IDE version ...

Price Description xx,xx DiagROM 32 Bit , Set of 2 Roms for the A1200 / A3000 / A4000 (original 40 pin Eproms)
12,50 Euro DiagROM 16 Bit , Single Rom soldered on adapter for A500 (rev.5 and earlier) A2000 (rev ...

Price Description 21 Euro Gotek 24 pin interface for Korg X2, X3, X3R synthesizers.
Gotek 24 pin interface for Korg X2, X3 and X3R : This is a Gotek 34 to 24 pin for the Korg synthesizers of ...

Prijs Omschrijving 25,00 Euro The MSX PS/2 Mouse Interface makes it possible to easily connect a PS/2 mouse to your MSX. 30,00 Euro As above, Including a (refurbished) PS/2 ball mouse (various brands / models) 35,00 Euro As above, Including ...

Price Description 35,00 Euro Amiga 500 external 2MB Fast RAM expansion (Expansion port)
45,00 Euro As above, including patched Kickstart 1.3 or 3.1 on adapter board(+4 euro for Rev. 5 and lower) (Proof of owning the Original ROM required , ...

Read More

Price Description 17,00 Euro PS/2 mouse adapter, connect a PS/2 (Optical) mouse to your Amiga / Atari computer with this interface. 25,00 Euro PS/2 mouse adapter, with a refurbished PS/2 Mouse, various brands / Types. 35,00 Euro PS/2 mouse adapter, ...

Price Description 17,50 Euro Amiga RGB Scart Adapter for the Commodore Amiga family of Computers. 22,50 Euro Amiga RGB Scart Adapter, standard Scartcable included 27,50 Euro Amiga RGB Scart Adapter, Premium OFC Scartcable included Comes with a modified DB25 connector ...

Price Description 21,00 Euro A complete and assembled TL866 Eprom Adapter, including a 48 pin ZIF Socket. (Also for TL866II - TL866II Plus)
16,00 Euro Like the above, but then as a complete DIY Kit.
This TL866 Eprom Adapter ...

Price Description 26,00 Euro Complete assembled T48 Eprom Adapter, including a 48 pin ZIF Socket with binary encoder.
21,00 Euro Complete assembled T48 Eprom Adapter, including a 48 pin ZIF Socket with 3/4 dipswitches.
This T48 Eprom Adapter supports ...

Price Description 70,00 Euro 5.25 Gotek with a 1.3 Oled display, Rotary Encoder with a jog shuttle, and a Buzzer This Gotek is delivered as an internal model with a specially designed 5,25 inch bracket to fit exactly in a ...

Price Description 2,50 Euro IDE Led Add-on for the A500 / 500+ (3D printed LED holder only!) 5,00 Euro IDE Led Add-on for the A500 / 500+ (IDE LED holder Kit complete !) A 3D printed Amiga 500 IDE ...

Read More

Price Description 20,00 ! Used, but in good condition Amiga DB23 – DB9 Genuine Commodore video cable for the Amiga.
Amiga DB23 – DB-9 RGB Video Cable  [390681-03] This is a used, tested and genuine Commodore Amiga DB23 ...

Price : 16.95 euros Description : Amiga RGB Scart cable for the Commodore Amiga family of Computers No Longer Available, Replaced by the Amiga RGB Scart Adapter Hooking up your Amiga to a RGB Capable monitor with this ...

Price Description 25,00 Euro Premium OFC RGB Scart cable for the Commodore Amiga with gold plated contacts and metal Scart plug.
No Longer Available, Replaced by the RGB Scart Adapter ! This  Amiga RGB Scart Cable has the ...

Read More

Price Description 30,00 Euro Amiga 1200 / 600 Bootselector, consists of 2 interfaces, 1 internal, and 1 external on the Floppy port.
(No soldering required) The Bootselector for the Amiga 1200 / 600 The other part connects to the ...

Price Description 70,00 Euro The 5.25 Gotek With 1.3 Oled display is supplied as a internal mounted model with a special 5.25 inch bracket for mounting in place of a 5.25 floppy drive bay or CD-Rom drive bay. version : ...

Read More

Price Description 8,00 Euro Composite cable with a 5-pin DIN plug on one side and 3 RCA (Cinch) plugs on the other side, for the Commodore 64 This cable can also be used for most of the Atari 8bit machines ...

Price Description 10,00 Euro VideoPac G7000/22 Composite Mod , completely build without Cable
15,00 Euro VideoPac G7000/22 Composite Mod , completely build with video / Mono audio Cable De Composite mod with cable is ready to use, and is completely ...

Read More

Price Description 70,00 Euro External Gotek Floppydrive in Amiga design with a 1.3 Oled display, Rotary Encoder and Buzzer External Gotek in Amiga design with 1.3 Oled display, Rotary and Buzzer I wanted to create a design that, ...

Price Description 65,00 Euro External Gotek in Amiga design with Rotary, 0.96 Oled display and a Buzzer
External Gotek in Amiga design with Rotary, 0.96 Oled display and Buzzer You may wonder why an External Gotek in Amiga ...

Price Description 37,50 Euro VideoPaxXL VideoPac Cartridge, MegaROM cartridge with 64 games on a single Videopac cartridge VideoPaxXL VideoPac Cartridge Multirom Cartridge with 64 games in 1 single ROM. This cartridge contains almost all of the software available for ...

Price Description 22,00 Euro External PS/2 Keyboard interface For Amiga 2000 with 3D printed case There are also versions available for the Amiga 1000 and the Amiga 500 PS/2 Keyboard interface For Amiga 2000 This interface was designed ...

Price Description 70,00 Euros External Gotek in Atari ST design with 1.3 Oled display, Rotary and Buzzer
65,00 Euros External Gotek in Atari ST design with 0.96 Oled display, Rotary and Buzzer
External Gotek in Atari ST design ...

Read More

Price Description 65,00 Euros External Gotek in Atari ST design with 0.96 Oled display, Rotary and Buzzer
70,00 Euros External Gotek in Atari ST design with 1.3 Oled display, Rotary and Buzzer
External Gotek in Atari ST design ...

Read More

Price Description 30,00 Euro OAS, The Open Amiga Sampler (Mono), Including 3D printed case (Available in Beige and Black). OAS, The Open Amiga Sampler, Introduction This is an 8-bit sound sampler for use with your Commodore Amiga.
...

Price Description 12,50 Euro MSX 14 pin Gotek adapter, for Philips MSX machines with a 14 pin connector (NMS8235 / NMS8245). 7,50 Euro 8245 Fast DiskROM Double-sided for upgrading the 8235, so it will be able to read and write ...

Price : 15,00 euros 8,00 Euro Description : Gotek 34 to 26 pin interface for Yamaha SY77 / SY99 which need a 26 pins floppy Interface for placing a Gotek. 35cm floppykabel 26 pin om het gotek interface aan te ...

Price Description 15,00 Euro Adapter for connecting a Sega Megadrive D-pad Controller to your C64 / Amiga
Sega Mega D-pad Adapter for the Commodore 64 and the Amiga A number of different  models of D-pad controllers have been  marketed for ...

Price Description 45,00 The Eiffel interface deluxe version allows you to connect a PS/2 mouse, PS/2 keyboard and 2 joysticks to your Atari Mega computer. Comes with a curled cable, An Atari ST cable is separately available Eiffel ...

Read More

Price Description 25,00 Euro USB Mouse interface for C64 / Amiga , including casing [3 pcs availalble , Prototype] 25,00 Euro USB Mouse interface for C64 / Amiga (USB-C version), including a brand new USB C mouse + USB-C to ...

Price Description 20,00 Euro MoJo The Amiga Mouse / Joystick switcher [ Auto ]. 25,00 Euro MoJo The Amiga Mouse / Joystick switcher [ Auto & Manual ]. MoJo the Amiga Mouse / Joystick switcher, introduction I was ...

Price Description 27,50 Euro Amiga 500 / 500+ / 2000 IDE Interface (68000 socket), with Vertical (standing) 40 pin connector 50,00 Euro Kit, As above, with directly connected IDE-2-CF adapter and pre-installed 512MB CF card 60,00 Euro Kit, As above, with IDE-2-CF slot ...

Price Description 67,50 Euro A NMS-VG8235 MSX Gotek with 1.3 Oled, Buzzer and Rotary Encoder, this Gotek Floppydrive Emulator comes as a built-in model with a special raised front (41 mm) for internal mounting in a NMS8235 machine. Mounting is ...

Price Description 6,00 Euro USB to Berg power cable (USB to Gotek power cable) USB to Berg Power Cable This extension cable allows you to power your Gotek by connecting this cable to a USB port.
Equipped ...

Price Description 17,50 Euro VgaST , the Atari ST-2-VGA Adapter, allows you to use a VGA Monitor on the Atari ST.
VgaST , the Atari ST-2-VGA Adapter, history :
It's been over 2 years since I designed ...

Price : 12.50 euros Description : Gotek 26pin Interface (Armstrad CPC664, CPC6128, Spectrum +3) Gotek 26pin Interface (Armstrad CPC664, CPC6128, Spectrum +3) : This is an Interface to use a Gotek drive instead of the usual disk drive ...

Price : 7.00 Euro Gotek Rotary Encoder Installation kit : Pre-assembled , just solder 4 wires and make a hole in the front. Online installation manual is available on the website. Do you already have a Gotek drive ...

Prijs Omschrijving 9,00 Euro 256 MB Compact Flash kaart (Sandisk / industrial)
14,00 Euro 512 MB Compact Flash kaart (Apacer / Industrial)
20,00 Euro 1 GB Compact Flash kaart (Apacer / Industrial)
256MB Compact Flash Card: Do you have ...

Price Description 27,50 Euro Amiga 2000 IDE Interface (Coprocessor Slot) 40 pin version 50,00 Euro Kit, As above, with directly connected IDE-2-CF adapter and pre-installed 512MB CF card 60,00 Euro Kit, As above, with IDE-2-CF slot adapter, 40CM IDE/Power cable and pre-installed 512MB ...

Price Description 35,00 Euro Amiga 500 / 500+ External IDE Interface 40pin with a beige housing in Amiga 500 look.
55,00 Euro Amiga 500 / 500+ External IDE Interface 40pin Kit, with direct-attached IDE-2-CF adapter and pre-installed 512MB CF card
...

Price Description 27,50 Euro Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) with vertical (standing) 44 pin connector 47,50 Euro Amiga 500 / 500+ IDE Interface 44pin kit, with directly attached IDE-2-CF adapter and pre-installed 512MB CF card
7,50 ...

Price Description 27,50 Euro Amiga 500 / 500+ IDE Interface Horizontal (68000 Socket) with horizontal (laying) 40 pin connector 47,50 Euro Amiga 500 / 500+ IDE Interface Horizontal kit, with IDE-2-CF adapter and pre-installed 512MB CF card 7,50 Euro Upgrade ...

Price Description 30,00 Euro CartridgeDuino II+ Tape Emulator for MSX, plays both .CAS and .TZX files.
10,00 Euro A SD card with more than 3000 .CAS / .TZX files.
CartridgeDuino Tape Emulator for MSX, Introduction. The time when data ...

Price : 12,50 euros Description : Gotek Quickdisk Interface, For those machines that still have Quickdisk Interface Application Gotek Quickdisk Interface : This is a Quickdisk Interface to use a Gotek drive (with special QuickDisk Firmware) instead of the  quick ...

Price Description 12,50 Euro Gotek Internal floppycable twister for Atari ST, no more problems with rotated and thgerefor too short cables. This ensures that the Gotek can be directly connected internally by extending and rotating the cable on the interface ...

Read More

Price Description 14,00 Euro Amiga External Gotek Interface with 15cm powercable
17,00 Euro As above but also with a 15cm Floppycable Floppy and power cable in other lengths possible Amiga External Gotek Interface to connect a Gotek drive ...

Read More

Price Description 15,00 Euro Gotek external Interface for the Atari ST (and the rest of the Family)
Basic model, no configuration, no power supply)
The Gotek External Interface for the Atari ST allows you to easily connect a ...

Price : 12,50 euro Beschrijving : Gotek FMTowns Interface Gotek FMTowns Interface : This is an Interface to easily enable the use of a Gotek floppydrive instead of the usual disk drive in an FMTowns machine.
I ...

Price Description 15,00 Euro Amiga Internal PC Floppydrive interface, allows you to replace the original Floppydrive with a unmodified PC Floppydrive.
Amiga Internal PC Floppydrive interface . Many Amiga disk drives have lost their lives over the years, ...

Price Description 25,00 Euro Gotek External Interface for the Atari ST (and the rest of the Family) Deluxe model (Mini USB OR DC Jack)
15,00 Euro SNAP!! USB Power Cartridge for the Atari ST, for the Gotek External Interface with ...

Price : 48,00 Euro Description : Black Gotek Floppy Drive Emulator shipped with the latest version of Flashfloppy.
Equipped with Rotary Encoder for convenient file selection and Eject/Insert functionality. Black Gotek Floppy Emulator with Rotary Encoder This model is ...

Price : 40,00 Euro Description : By default the Gotek Floppy Emulator is delivered with the latest version of Flashfloppy.
But on request it can also be supplied with cortex firmware (specifically commodore amiga computers). Gotek Floppy Emulator in ...

Read More

Price Description 40,00 Euro By default, the Gotek Floppydrive Emulator comes with the latest official version of Flashfloppy.
Gotek Floppydrive Emulator in a Grey Case The drives are provided with a programming header, already updated with the latest ...

Price Description 30,00 Euro Atari Video Mode Monitor Tester, 4 modes, with on/off switch in a 3D printed casing. Atari Video Mode Monitor Tester, Introduction. If you have a monitor in mind, but you have no idea if ...

Price : 50,00 Euros Description : New in the range: The Gotek Mini external Floppy drive which, in addition to the standard colors black and beige, is also available in various fresh colours.
The Gotek Mini External is always ...

Price Description 60,00 Euro Amiga 2000 Gotek internal with 0.91 Oled, buzzer and Rotary Encoder for the A2000. The mounting is quite simple and fits exactly in a 3.5 inch opening of the Amiga 2000 Version : Oled 0.91″ display, ...

Read More

Price Description 62,50 Euro Amiga 2000 Gotek internal with 0.96 Oled, buzzer and Rotary Encoder for the A2000. The mounting is quite simple and fits exactly in a 3.5 inch opening of the Amiga 2000 Version : Oled 0.96″ display, ...

Read More

Price Description 47,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 500 / 500+.
Assembly is simple and can be done without drilling or modifying the Amiga or Gotek. Version : ...

Read More

Price Description 48,00 Euro Gotek Floppy Emulator with Rotary Encoder in light grey, delivered with the latest version of Flashfloppy. Equipped with Rotary Encoder for convenient file selection and Eject/Insert functionality Gotek Floppy Emulator with Rotary Encoder in ...

Read More

Price Description 65,00 Euro 5.25 Gotek with 0.96 Oled display, Buzzer, and Rotary Encoder this Gotek comes as a built in model with a special 5,25 inch bracket for assembly in a 5,25 floppy drive or CD-Rom drive bay. Uitvoering ...

Read More

Price : 60,00 Euro Description : A standard size black Gotek with 0.96 Oled and Rotary Encoder, this Gotek Floppydrive Emulator comes as a flush mount model with a fully 3D printed housing. Version: Oled 0.96 display, Rotary Encoder and ...

Price Description 62,50 Euro An NMS-VG8235 MSX Gotek with 0.96 Oled Display, Buzzer and Rotary Encoder, this comes as a built-in model with a special raised front (41 mm) for mounting in an NMS8235 machine. The assembly is quite simple ...

Prijs Omschrijving 62,50 Euro Een NMS8250 MSX Gotek met 0.96 Oled en Rotary Encoder, deze Gotek Floppydrive Emulator wordt geleverd als inbouw model met een speciaal verhoogd front voor interne montage in een NMS8250 / 55 / 80 MSX machine ...

Price Description 52,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 500 / 500+.
Assembly is simple and can be done without drilling or modifying the Amiga or Gotek. Version : ...

Read More

Price Description 9,00 Euro IDE-2-CF Compact Flash Slot Adapter (40 Pin, Male, External) Connect to a mainboard or IDE controller with a 40 pin IDE cable IDE-2-CF Adapter : Do you have an Amiga or Atari with an IDE/ATA ...

Price Description 50,00 Euro Alfa Data AT-BUS 2008 (Clone) , Autoconfig IDE / ATAPI ZORRO II plug-in card Amiga for the Amiga 2000/3000/4000 New Version with some minor modifications Alfa Data AT-BUS 2008 (Clone) IDE / ATAPI ZORRO ...

Read More

Price Description 30,00 Euro 15Khz VGA Monitor tester, with on/off switch in a newly designed 3D printed housing.
15Khz VGA Monitor Tester, Introduction. If, like me, you would like to have a VGA monitor that supports 15Khz modes ...

Price Description 32,50 Euro Atari Diagnostic Cartridge 'Bombs away' standard Edition for (Amongst Others) the Atari ST / TT / STE / Mega (With housing) (Atari Test Kit AIO Cartridge)
37,50 Euro As the above but then with also the ...

Prijs Omschrijving 20,00 Euro MSXDiag, MSX Diagnostic Cartridge, System info and systeem test cartridge for thee MSX, In a green/black casing MSXDiag Diagnostic Cartridge, Introduction I was looking for a test cartridge for the MSX for quite some ...

Price Description 2,50 Euro Screw set Amiga 500
Screw set Amiga 500 If you buy a second-hand Commodore Amiga 500 nowadays , there is a good chance that screws are missing or have been replaced by screws that do ...

Price Description 6,00 Euro DSUB DB 19 Male Connector (Connector only).
8,50 Euro DSUB DB 19 Male Connector (Connector and shell)
DSUB DB 19 Connector and Shell (introduction) The DSUB DB 19 Connector and Shell are very hard ...

Price :  10,00 Euro A 3D printed A500 Trapdoor Cover. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover for the Commodore A500 is ...

Price : 7,00 Euro A 3D printed Amiga 500 Expansion Port Cover. The lid is printed in PLA + in a color that is quite close to an original undiscolored Amiga 500.
The Amiga 500 expansion port cover ...

Price Description 60,00 Euro Amiga 2000 IDE / 2MB RAM / Kick3.1+ (Upgrade Kit), for placement in the Co-Processor slot of the Amiga 2000
Amiga 2000 IDE / 2MB RAM / Kick3.1+ (Upgrade Kit) for the A2000 I ...

Price Description 2,50 Euro Screw set Amiga 1200
Screw set Amiga 1200 If you buy a second-hand Commodore Amiga 1200 nowadays , there is a good chance that screws are missing or have been replaced by screws that do ...

Price Description 25,00 Euro Atari Diagnostics Cartridge SALT 400 / 600 / 800 / 800XL / 65XE / 130XE / 800XE (Rev. 1.01) including cartridge housing
Atari Diagnostics Cartridge SALT v1.01. This cartridge is one with 4 banks ...

Price Description 12,00 Euro Atari ST-2-Mega Keyboard Adapter , for connecting an Atari ST keyboard to your Atari Mega
Atari ST-2-Mega Keyboard Adapter : With this adapter you can easily replace a missing or broken keyboard of your ...

Price Description 15,00 Euro Set of 2 Atari Mega Maskrom Adapters, for upgrading your TOS to EmuTOS 121 or Rainbow TOS (1.4) by using standard EPROMS
25,00 Euro Set of 2 Atari Mega Maskrom Adapters, including EmuTOS 1.3 or KaosTOS ...

Price Description 3,50 Euro Amiga CR2032 Replacement for Varta Accu's (Without CR2032 Battery)
4,50 Euro Amiga CR2032 Replacement for Varta Accu's (With a CR2032 Battery)
Amiga CR2032 Replacement for Varta Batteries If you removed your (or not) leaking ...

Price Description 35,00 Euro Amiga 500 512KB Memory Expansion with Clock (RTC)
2,50 Euro Optional on/off switch with +/- 20 cm connection cable.
Amiga 500 512KB Memory Expansion with Clock .  Doubles the memory of your amiga 500 ...

Price Description Sold Out Memory expansion 512KB for the Amiga 500 (Single Chip version).
2,50 Euro Optional on/off switch with +/- 20 cm connection cable.
Amiga 500 trapdoor memory expansion 512KB Double the internal memory of your Amiga ...

Price Description 17,50 Euro DF0: - DF2: Buffered boot selector for the Amiga 2000 (DF1: or DF2: supported Device ID by setting 3 Jumpers). Including boot selector switch with +/- 30 cm connection cable. Buffered DF0: - DF2: ...

Read More

Price Description 30,00 Euro AMiDi, the Amiga Midi Interface, with Midi In, Midi Out and Midi Thru ports. AMiDi, the Amiga Midi interface, introduction Unlike the Atari, the Amiga does not have standard Midi connections, a missed opportunity ...

Price Description 30,00 Euro Atari Eiffel interface for connecting a PS/2 mouse and Keyboard to your Atari computer
Comes with a Curled Cable Atari Eiffel interface for connecting a PS/2 mouse and Keyboard : Right after the ST-2-Mega ...

Price Description 5,00 Euro 10 CM S0 pin SCSI cable with 2 Crimp connectors 6,00 Euro 20 CM S0 pin SCSI cable with 2 Crimp connectors 7,00 Euro 30 CM S0 pin SCSI cable with 2 Crimp connectors ...

Price Description 14,00 Euro ForFour, the Amiga 4 player joystick adapter allows you to play compatible games with 4 players simultaneously. ForFour, The Amiga 4 player joystick adapter : introduction There are a number of games released for ...

G7000 Videopac models and type numbers For the fans of the Philips G7000 I have made an overview of the different models that have been released over the years.
These models are all called G7000, but have a ...

Price Description 25,00 Euro Amiga 500 512KB Memory Expansion with 4 socketed DIP RAMs
Alle kickstartswitches komen met een 20cm kabel en schakelaar 2,50 Euro 20CM Cable with on/off switch to replace the jumper
Amiga 500 512KB Memory ...

Read More

Price Description 7,00 Euro IDE-2-CF Adapter (40 Pin, Female, Power over IDE support, Horizontal) Can be directly attached to a Connect to a mainboard or IDE controller. IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE/ATA ...

Price Description 15,00 Euro Cartridge Best of Atari 8Bit Classics, Vol. 1, 2 or 3 [Single volume]
40,00 Euro Cartridge Best of Atari 8Bit Classics, Vol. 1, 2 and 3 [Set of all 3 volumes] Due to lack of interest, ...

Read More

Price Description 25,00 Euro MSX Tool Cartridge Volume #1, 4 banks with tools , among them are Turbo 5000 and an assembler. with a Purple/Black housing 20,00 Euro As above , but without the housing The Tool Cartridge contents ...

Also Interesting Grey Gotek Floppydrive Flashfloppy Firmware Grey Gotek Floppy with Rotary Encoder A2000 internal Gotek with 0.91 Oled/Rotary A2000 internal Gotek with 0.96 Oled/Rotary Amiga External Gotek with 0.91 Oled, Rotary and buzzer Amiga External Gotek with 0.96 Oled, ...

Price Description 17,50 Euro DF0: - DF2: Amiga 3000 Buffered Bootselector (DF1: or DF2: Device support choice by means of 2 Jumpers). Including 30cm cable with switch to select DF0: or DFX: as bootdrive. Amiga 3000 Buffered Bootselector ...

Read More

Price Description 22,00 Euro Internal PS/2 Keyboard interface For Amiga 500 / 500+ Direct attached with power LED and floppy disk activity LED Internal PS/2 Keyboard interface For Amiga 500(+) This interface was designed by me, and based ...

Price Description 17,50 Euro 2 way Amiga Kickstart Switch for the A500 / 500+ / 600 / 2000 with small footprint
30,00 Euro As above, with a ROM with 1 x kickstart and DiagROM 1.30
35,00 Euro 3 way kickswitch, ...

Price Description 15,00 Euro Amiga 2000 CPU Relocator Board, for placement in the Co-Processor slot of the Amiga 2000
27,50 Euro As above, Including onboard IDE interface (HDD / CD-ROM / CF Support)
Amiga 2000 CPU Relocator Board ...

Read More

Price Description 4,00 Euro 10 CM Floppy Disk cable with Crimp connectors (Female / Female) 4,50 Euro 15 CM Floppy Disk cable with Crimp connectors (Female / Female) 5,00 Euro 20 CM Floppy Disk cable with Crimp connectors (Female / ...

Price Description 22,00 Euro Amiga Switchless Bootselector Deluxe Version !, switch easily between bootdrives by using the Amiga Keyboard.
Amiga Switchless Bootselector Deluxe Version The boot selector turns your external disk drive / gotek into your df0: (your ...

Price Description 65,00 Euro External Floppydrive for the Amiga incl. case and external interface with 25 cm floppy and power cable. 25,00 Euro Amiga External Interface with 25 cm floppy and power cable for connecting a PC Floppydrive. 15,00 Euro ...

Price Description 15,00 Euro Atari XL 64 bank Mega Cartridge for the Atari XL / XE including 16 games of 16KB.
30,00 Euro Atari XL 64 bank Mega Cartridge for the Atari XL / XE including 64 games of 16KB.
...

Price : 4,00  euros  3,00  euros  (in combination with Gotek Drive) Description : MicroSD card reader for use with a Gotek Floppydrive Emulator.
Perhaps the smallest card reader out there 🙂 Almost not excellent from the Gotek drive, so ...

Price : 3.99 euros Parts : SMT (805), ThroughHole for the Headers and Socket.
Difficulty level : 2 Amiga Bootselector PCB for a buffered DF0: - DF1: boot selector for the A500 / 2000 This boot selector is really ...

Prijs : 3.99 euro Onderdelen : ThroughHole.
Moeilijkheids graad : 1 Dit PCB is mijn interpretatie van het oorspronkelijke Amiga Bootselector ontwerp door Jussi Kilpelainen.
Geen enkel SMD Component, en de optie om ook van DF2: te kunnen booten.
...

Prijs : 3.99 euro Onderdelen : 75% SMD, en 25% ThroughHole.
Moeilijkheids graad : 2 (Voor een 512 KB geheugenuitbreiding)
Moeilijkheids graad : 3 voor alle overige toepassingen. Het Mini A501 PCB is een ontworpen door PeteAU, een gebruiker ...

Prijs : 3.99 euro Onderdelen : ThroughHole.
Moeilijkheids graad : 1 De Atari Diagnostics cartridge is een stuk hardware wat zijn oorsprong vindt bij Atari zelf.
Een DIY ontwerp van het PCB is te vinden op gossuin.be  (Franstalige Site)
De ...

Prijs : 3.99 euro Onderdelen : SMD (805),  ThroughHole voor de PLCC84  Socket.
Moeilijkheids graad : 2 Dit PCB is een ontwerp gemaakt door DJBase (Amigaworld), en behelst een adapter die over de Gayle chip in je amiga 1200 ...

Prijs : 6.99 euro (Nog Niet Beschikbaar) Onderdelen : ThroughHole , De moeilijkheidsgraad zit hem in de hoeveelheid soldeerwerk.
Moeilijkheids graad : 2 Amiga 2000 ZorroII IDE Interface Dit PCB is een ontwerp van eigen hand, in een van ...

Amiga 500 512KB Memory Expansion (SOJ26/20) Price : 4.99 euros Parts : ThroughHole , SMT (SOJ 26/20)
Difficulty : 2 PCB Amiga 500 512KB Memory Expansion (SOJ26/20) This PCB is my own design, I had been looking for ...

PCB - Amiga 500 512KB Memory Expansion (SOJ42) Price : 4.99 euros Parts : ThroughHole , SMT (SOJ 42)
Difficulty Level : 2 PCB - Amiga 500 512KB Memory Expansion (SOJ42) This PCB is my own design, inspired ...

Amiga 2000 - PS/2 Keyboard Interface Price : 4.99 euros Parts : ThroughHole
Difficulty : 1 Amiga 2000 - PS/2 Keyboard Interface This PCB is my own design, inspired by the rather extensive range of PS/2 mouse adapters ...

Price : 15.00 euros Description : Buffered Amiga BootSelector for the A500 / 2000  (Boot Device choice by means of Jumper or Switch with +/- 20 cm connection cable. Buffered Amiga Boot Selector for the A500 / 2000.

The ...

Price : 17.50 euros 30.00 euros Description : Buffered OpenKickstart Switch for the Amiga 500/600/2000 Including switch with +/- 20 cm connection cable. As above with a rom with 1 kickstart and a Diagrom 1.21 for Amiga 500 (plus) / ...

Prijs : 4.99 euros (for 4 pieces) Parts : ThroughHole , SMD (SOJ 26/20)
Difficulty : 2 PCB_SOJ26 to DIP20 adapter (Left and right hand bearing): These PCBs are my own design, I had been looking for a PCB ...

Price : 19.95 euros Description : No Longer Available ! Used, but in good condition DB23 - (6 pin) DIN genuine Commodore video cable for the Amiga. Amiga DB-23 to DIN RGB Video Cable This is a used, tested ...

Price Description 17,50 Euro Amiga L-shape Kickstart Switch for the Amiga 500 Rev. 5 Including switch with +/- 20 cm connection cable.
Amiga L-shape Kickstart Switch This Amiga L-shape Kickstart Switch is designed by me for a ...

Price Description 17,50 Euro Amiga Kickstart Switch for the A500 / 500+ / 600 / 2000 with a smal footprint. Includes switch with +/- 20 cm connection cable. Amiga Kickstart switch This interface was designed by me and is ...

Price Description 6,00 Euro 10 CM Floppy Extension Cable with Crimp connectors (Male / Female)
7,00 Euro 15 CM Floppy Extension Cable with Crimp connectors (Male / Female)
good quality 34 Pin floppy extension cables (in the colors ...

Read More

Price : 8 euros Description : Gotek IDC 34 pin to Edge adapter, For those machines that only have edge connectors on it's floppycable. Gotek IDC 34 pin to Edge adapter : There are a number of systems that ...

Price Description 7,00 Euro IDE-2-CF Compact Flash Adapter (40 Pin, Male, Vertical) Connect to a mainboard or IDE controller with a 40 pin IDE cable IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE / ATA ...

Price Description 4,00 Euro 44 PIN IDE cable, 5 CM with Crimp connectors (Female / Female) 7,00 Euro As above , 20 CM length 8,00 Euro As above , 30 CM length 9,00 Euro As above , 40 CM length
...

Price Description 37,50 Euro MegaLoadOn16 Cartridge for the MSX including 64 games including a BLUE cartridge housing.
32,50 Euro As the above, Bare PCB without the cartridge housing
Specially designed for the MSX, the MegaLoadOn16 Cartridge. This cartridge ...

Price Description 37,50 Euro MegaLoadOn32 Cartridge for the MSX including 32 games including a RED cartridge housing.
32,50 Euro As the above, Bare PCB without the cartridge housing
Specially designed for the MSX, the MegaLoadOn32 Cartridge. This cartridge ...

Price Description 10,00 Euro Premium OFC Scart cable for, among others, the MSX Computer, with gold-plated contacts and a metal Scart plug.
MSX Premium OFC Scartkabel Especially for the (Philips) MSX, a Premium OFC Scart-Scartcable This cable provides a ...

Price Description 30,00 Euro Amiga 500 internal 2MB Fast RAM expansion (68000 Socket)
38,00 Euro As above, including patched Kickstart 1.3 or 3.1 on adapter board(+4 euro for Rev. 5 and lower) (Proof of owning the Original ROM required , ...

Read More

Price : 19,00 euros 22,50 euros Description : Amiga Switchless Boot Selector DF0: - DF1: , switch between boot drives using the Amiga Keyboard. Deluxe Amiga Switchless Boot Selector, allows to set fixed default bootdrive at power up ...

Price : 4,00    euro 4,50    euro 5    euro 6    euro Description :
40 Pin IDE cable F / F (Various lengths) 10 CM  with Crimp connectors (Female / Female) 15 CM  with Crimp connectors (Female ...

Price : 7.50 euro Description : Shop : Eprom Adapter 2 x 32KB , use 2 banks of 32KB in your old hardware. Eprom Adapter 2 x 32KB : A lot of old equipment still uses  Eproms  to accommodate a driver ...

Price : Open to any offer Description : Amiga 2000 for sale, 3 MB memory, Kickstart 3.1+, With IDE, CF and DVD-ROM My Amiga 2000 is for sale : My Development / Test machine can go to a ...

Price : Open to any offer Description : Amiga 600 For sale, 2 MB Chipram , Kickstart 3.1, With CF-2-IDE adapter and CF harddisk. Amiga 600 for sale  : This amiga 600 is one out of my own ...

Prijs : 3,99 Euro  (IC leg Straightener 0.6")
7,50 Euro  (In Combinatie met de 0,3" IC leg Straightener) Een 3D geprinte IC leg Straightener 0.6" Aangezien ik niet echt een pakkende nederlandse benaming weet doe ik het maar in ...

Prijs : 3,99 Euro  (IC leg Straightener 0.3")
7,50 Euro  (In Combinatie met de 0,6" IC leg Straightener) Een 3D geprinte IC leg Straightener 0.3" Aangezien ik niet echt een pakkende nederlandse benaming weet doe ik het maar in ...

Price :  10,00 Euro A 3D printed A500 Ventilated Trapdoor lid. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor lid with ventilation slots for the ...

Price :  10,00 Euro A 3D printed A600 Ventilated Trapdoor lid (Creme coloured). The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor lid with ventilation ...

Price :  10,00 Euro A 3D printed A600 Trapdoor Cover. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover for the Commodore A600 is ...

Price :  10,00 Euro A 3D printed A1200 Ventilated Trapdoor member. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover with honeycomb vents for ...

Price :  10,00 Euro A 3D printed A1200 Trapdoor cover for the Amiga 1200.  The Trapdoor lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover ...

Price : 4,50    euro 3,50    euro Description : 20 CM    1 Molex to 2 Berg power cable  (5,25 to 2 x 3,5 FDD power cable) 20 CM    1 Molex to 1 Berg power cable  (5,25 to ...

Price Description 27,50 Euro Amiga A500 / A2000 Internal IDE Interface (IDE Interface only) (Various models) For a complete working system you also need an  IDE 2 Compact Flash Adapter, and a Compact Flash Card.
The picture on the right shows ...

Read More

Xgecu T48 Eprom Adapter for 27C400/800/160/322 It concerns the completely finished adapter including 48 pin ZIF Socket, not just the PCB The eprom programming adapter will support 27C322 (4Mx8-bit), 27C160 (2Mx8-bit), 27C800 (1Mx8-bit) 27C400 (512kx8-bit). This adapter converts the mask- ...

Price Description 15,00 Euro The MSX Sega Mega D-Pad Adapter makes it possible to connect a Sega Megadrive D-pad Controller to your MSX.
MSX Sega Mega D-Pad Adapter including housing A number of different models of D-pad controllers ...