Shop : Screw set Amiga 500

Screw set Amiga 500

If you buy a second-hand Commodore Amiga 500 nowadays , there is a good chance that screws are missing or have been replaced by screws that do not fit or poorly fit.
The screws on the front of the Amiga in particular are very tight, if they are too long you will get so-called pimples (bulges that are discolored because the housing cannot handle the length of the screws) at the top of your Amiga housing.
I have a set of screws that make it possible to provide the amiga with suitable screws of the correct size.

Screw set Amiga 500, different sizes

The A500(+) screw set consists of the following sizes:

3 x 6mm for use on the outside front
3 x 8mm for use on the outside back
4 x 6mm for attaching the motherboard:
(2 x at the front, 2 x at the left).

The location of the 6mm screws are indicated in the photos with a red circle, the location of the 8mm screws are indicated with a blue square.

The screws have a convex head and a flattened point to prevent damage as much as possible.
Make sure you do not confuse the short and long screws, use at your own risk.

You'll find the screw set for the A1200 over here

Also Interesting