:Overige

Price : 12,50 euros Description : Gotek Quickdisk Interface, For those machines that still have Quickdisk Interface Application Gotek Quickdisk Interface : This is a Quickdisk Interface to use a Gotek drive (with special QuickDisk Firmware) instead of the  quick ...

Prijs Omschrijving 12,50 Euro MSX 14 pin Gotek adapter, Voor de Philips MSX machines met een 14 pin connector (NMS8235 / NMS8245). 7,50 Euro 8245 Fast DiskROM Double-sided voor de 8235 te upgraden zodat deze dubbelzijdige disks kan lezen en ...

Price : 12.50 euros Description : Gotek 26pin Interface (Armstrad CPC664, CPC6128, Spectrum +3) Gotek 26pin Interface (Armstrad CPC664, CPC6128, Spectrum +3) : This is an Interface to use a Gotek drive instead of the usual disk drive ...

Price : 12,50 euro Beschrijving : Gotek FMTowns Interface Gotek FMTowns Interface : This is an Interface to easily enable the use of a Gotek floppydrive instead of the usual disk drive in an FMTowns machine.
I ...

Price : 12,50 euros 8,00 Euro Description : Gotek 34 to 26 pin interface for Yamaha SY77 / SY99 which need a 26 pins floppy Interface for placing a Gotek. 35cm floppykabel 26 pin om het gotek interface aan te ...

Price Description 21 Euro Gotek 24 pin interface for Korg X2, X3, X3R synthesizers.
Gotek 24 pin interface for Korg X2, X3 and X3R : This is a Gotek 34 to 24 pin for the Korg synthesizers of ...

Price Description 30,00 Euro Atari Video Mode Monitor Tester, 4 modes, with on/off switch in a 3D printed casing. Atari Video Mode Monitor Tester, Introduction. If you have a monitor in mind, but you have no idea if ...

Price Description 9,00 Euro IDE-2-CF Compact Flash Slot Adapter (40 Pin, Male, External) Connect to a mainboard or IDE controller with a 40 pin IDE cable IDE-2-CF Adapter : Do you have an Amiga or Atari with an IDE/ATA ...

Price Description 30,00 Euro 15Khz VGA Monitor tester, with on/off switch in a newly designed 3D printed housing.
15Khz VGA Monitor Tester, Introduction. If, like me, you would like to have a VGA monitor that supports 15Khz modes ...

Price Description 20,00 Euro A complete and assembled TL866 Eprom Adapter, including a 48 pin ZIF Socket. (Also for TL866II - TL866II Plus)
15,00 Euro Like the above, but then as a complete DIY Kit.
This TL866 Eprom Adapter ...

Price Description 8,50 Euro VideoPac G7000/22 Composite Mod , completely build without Cable
12,50 Euro VideoPac G7000/22 Composite Mod , completely build with video / Mono audio Cable De Composite mod with cable is ready to use, and is completely ...

Read More

Price Description 5,00 Euro 10 CM S0 pin SCSI cable with 2 Crimp connectors 6,00 Euro 20 CM S0 pin SCSI cable with 2 Crimp connectors 7,00 Euro 30 CM S0 pin SCSI cable with 2 Crimp connectors ...

Price Description Unavailable Complete assembled T48 Eprom Adapter, including a 48 pin ZIF Socket with binary encoder.
20,00 Euro Complete assembled T48 Eprom Adapter, including a 48 pin ZIF Socket with 3/4 dipswitches.
This T48 Eprom Adapter supports Eproms ...

G7000 Videopac models and type numbers For the fans of the Philips G7000 I have made an overview of the different models that have been released over the years.
These models are all called G7000, but have a ...

Price Description 7,00 Euro IDE-2-CF Adapter (40 Pin, Female, Power over IDE support, Horizontal) Can be directly attached to a Connect to a mainboard or IDE controller. IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE/ATA ...

Price Description 4,00 Euro 10 CM Floppy Disk cable with Crimp connectors (Female / Female) 4,50 Euro 15 CM Floppy Disk cable with Crimp connectors (Female / Female) 5,00 Euro 20 CM Floppy Disk cable with Crimp connectors (Female / ...

Prijs Omschrijving 9,00 Euro 256 MB Compact Flash kaart (Sandisk / industrial)
15,00 Euro 512 MB Compact Flash kaart (Sandisk)
256MB Compact Flash Card: Do you have an Amiga or Atari with an IDE / ATA connection and do ...

Price : 4,00  euros  3,00  euros  (in combination with Gotek Drive) Description : MicroSD card reader for use with a Gotek Floppydrive Emulator.
Perhaps the smallest card reader out there 🙂 Almost not excellent from the Gotek drive, so ...

Price Description 6,00 Euro 10 CM Floppy Extension Cable with Crimp connectors (Male / Female)
7,00 Euro 15 CM Floppy Extension Cable with Crimp connectors (Male / Female)
good quality 34 Pin floppy extension cables (in the colors ...

Read More

Price : 8 euros Description : Gotek IDC 34 pin to Edge adapter, For those machines that only have edge connectors on it's floppycable. Gotek IDC 34 pin to Edge adapter : There are a number of systems that ...

Price Description 7,00 Euro IDE-2-CF Compact Flash Adapter (40 Pin, Male, Vertical) Connect to a mainboard or IDE controller with a 40 pin IDE cable IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE / ATA ...

Price Description 4,00 Euro 44 PIN IDE cable, 5 CM with Crimp connectors (Female / Female) 7,00 Euro As above , 20 CM length 8,00 Euro As above , 30 CM length 9,00 Euro As above , 40 CM length
...

Price : 4,00    euro 4,50    euro 5    euro 6    euro Description :
40 Pin IDE cable F / F (Various lengths) 10 CM  with Crimp connectors (Female / Female) 15 CM  with Crimp connectors (Female ...

Price : 7.50 euro Description : Shop : Eprom Adapter 2 x 32KB , use 2 banks of 32KB in your old hardware. Eprom Adapter 2 x 32KB : A lot of old equipment still uses  Eproms  to accommodate a driver ...

Prijs : 3,99 Euro  (IC leg Straightener 0.6")
7,50 Euro  (In Combinatie met de 0,3" IC leg Straightener) Een 3D geprinte IC leg Straightener 0.6" Aangezien ik niet echt een pakkende nederlandse benaming weet doe ik het maar in ...

Prijs : 3,99 Euro  (IC leg Straightener 0.3")
7,50 Euro  (In Combinatie met de 0,6" IC leg Straightener) Een 3D geprinte IC leg Straightener 0.3" Aangezien ik niet echt een pakkende nederlandse benaming weet doe ik het maar in ...

Price : 4,50    euro 3,50    euro Description : 20 CM    1 Molex to 2 Berg power cable  (5,25 to 2 x 3,5 FDD power cable) 20 CM    1 Molex to 1 Berg power cable  (5,25 to ...

Xgecu T48 Eprom Adapter for 27C400/800/160/322 It concerns the completely finished adapter including 48 pin ZIF Socket, not just the PCB The eprom programming adapter will support 27C322 (4Mx8-bit), 27C160 (2Mx8-bit), 27C800 (1Mx8-bit) 27C400 (512kx8-bit). This adapter converts the mask- ...