:Amiga

Price Description 20,00 Euro 32 Bit , Set of 2 Roms for the A1200 / A3000 / A4000 (original 40 pin Eproms)
12,50 Euro 16 Bit , Single Rom with adapter for A500 (rev.5 and earlier) A2000 (rev. 4.2 and ...

Price Description 3,50 Euro Amiga CR2032 Replacement for Varta Accu's (Without CR2032 Battery)
4,50 Euro Amiga CR2032 Replacement for Varta Accu's (With a CR2032 Battery)
Amiga CR2032 Replacement for Varta Batteries If you removed your (or not) leaking ...

Price Description 13,50 Euro The Amiga 'RGB to VGA' adapter makes it possible to connect a VGA (LCD) monitor* to your amiga. This Adapter is a replica of the Original Commodore VGA Sync Adapter, but uses a modified DB23 connector ...

Price Description 35,00 Euro Amiga 500 512KB Memory Expansion with Clock (RTC)
2,50 Euro Optional on/off switch with +/- 20 cm connection cable.
Amiga 500 512KB Memory Expansion with Clock .  Doubles the memory of your amiga 500 ...

Price Description Sold Out Memory expansion 512KB for the Amiga 500 (Single Chip version).
2,50 Euro Optional on/off switch with +/- 20 cm connection cable.
Amiga 500 trapdoor memory expansion 512KB Double the internal memory of your Amiga ...

Price Description 17,50 Euro DF0: - DF2: Buffered boot selector for the Amiga 2000 (DF1: or DF2: supported Device ID by setting 3 Jumpers). Including boot selector switch with +/- 30 cm connection cable. Buffered DF0: - DF2: ...

Read More

Price Description 27,50 Euro Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) with vertical (standing) 44 pin connector 47,50 Euro Amiga 500 / 500+ IDE Interface 44pin kit, with directly attached IDE-2-CF adapter and pre-installed 256MB CF card
...

Price Description 30,00 Euro AMiDi, the Amiga Midi Interface, with Midi In, Midi Out and Midi Thru ports. AMiDi, the Amiga Midi interface, introduction Unlike the Atari, the Amiga does not have standard Midi connections, a missed opportunity ...

Price Description 50,00 Euro Alfa Data AT-BUS 2008 (Clone) , Autoconfig IDE / ATAPI ZORRO II plug-in card Amiga for the Amiga 2000/3000/4000 New Version with some minor modifications Alfa Data AT-BUS 2008 (Clone) IDE / ATAPI ZORRO ...

Read More

Price Description 5,00 Euro 10 CM S0 pin SCSI cable with 2 Crimp connectors 6,00 Euro 20 CM S0 pin SCSI cable with 2 Crimp connectors 7,00 Euro 30 CM S0 pin SCSI cable with 2 Crimp connectors ...

Price Description Unavailable Complete assembled T48 Eprom Adapter, including a 48 pin ZIF Socket with binary encoder.
20,00 Euro Complete assembled T48 Eprom Adapter, including a 48 pin ZIF Socket with 3/4 dipswitches.
This T48 Eprom Adapter supports Eproms ...

Price Description 14,00 Euro ForFour, the Amiga 4 player joystick adapter allows you to play compatible games with 4 players simultaneously. ForFour, The Amiga 4 player joystick adapter : introduction There are a number of games released for ...

Price Description 25,00 Euro Amiga 500 512KB Memory Expansion with 4 socketed DIP RAMs
Alle kickstartswitches komen met een 20cm kabel en schakelaar 2,50 Euro 20CM Cable with on/off switch to replace the jumper
Amiga 500 512KB Memory ...

Read More

Price Description 17,00 Euro PS/2 mouse adapter, connect a PS/2 (Optical) mouse to your Amiga / Atari computer with this interface. 25,00 Euro PS/2 mouse adapter, with a refurbished PS/2 Mouse, various brands / Types. 35,00 Euro PS/2 mouse adapter, ...

Price Description 7,00 Euro IDE-2-CF Adapter (40 Pin, Female, Power over IDE support, Horizontal) Can be directly attached to a Connect to a mainboard or IDE controller. IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE/ATA ...

Price Description 35,00 Euro Amiga 500 / 500+ External IDE Interface 40pin with a beige housing in Amiga 500 look.
55,00 Euro Amiga 500 / 500+ External IDE Interface 40pin Kit, with direct-attached IDE-2-CF adapter and pre-installed 256MB CF card
...

Price Description 22,00 Euro External PS/2 Keyboard interface For Amiga 2000 with 3D printed case There are also versions available for the Amiga 1000 and the Amiga 500 PS/2 Keyboard interface For Amiga 2000 This interface was designed ...

Also Interesting Grey Gotek Floppydrive Flashfloppy Firmware Grey Gotek Floppy with Rotary Encoder A2000 internal Gotek with 0.91 Oled/Rotary A2000 internal Gotek with 0.96 Oled/Rotary Amiga External Gotek with 0.91 Oled, Rotary and buzzer Amiga External Gotek with 0.96 Oled, ...

Price Description 52,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 500 / 500+.
Assembly is simple and can be done without drilling or modifying the Amiga or Gotek. Version : ...

Read More

Price Description 15,00 Euro Amiga Internal PC Floppydrive interface, allows you to replace the original Floppydrive with a unmodified PC Floppydrive.
Amiga Internal PC Floppydrive interface . Many Amiga disk drives have lost their lives over the years, ...

Price Description 30,00 Euro Amiga 1200 / 600 Bootselector, consists of 2 interfaces, 1 internal, and 1 external on the Floppy port.
(No soldering required) The Bootselector for the Amiga 1200 / 600 The other part connects to the ...

Price Description 14,00 Euro Amiga External Gotek Interface with 15cm powercable
17,00 Euro As above but also with a 15cm Floppycable Floppy and power cable in other lengths possible Amiga External Gotek Interface to connect a Gotek drive ...

Read More

Price Description 55,00 Euro Shop : Amiga 500 / 500+ IDE Interface DOM Kit (68000 Socket), Includes a pre-installed 1GB DOM.
Amiga 500 / 500+ IDE Interface DOM Kit (68000 Socket) This is a special 44 pin IDE version designed ...

Price Description 17,50 Euro DF0: - DF2: Amiga 3000 Buffered Bootselector (DF1: or DF2: Device support choice by means of 2 Jumpers). Including 30cm cable with switch to select DF0: or DFX: as bootdrive. Amiga 3000 Buffered Bootselector ...

Read More

Price Description 22,00 Euro Internal PS/2 Keyboard interface For Amiga 500 / 500+ Direct attached with power LED and floppy disk activity LED Internal PS/2 Keyboard interface For Amiga 500(+) This interface was designed by me, and based ...

Price Description 17,50 Euro 2 way Amiga Kickstart Switch for the A500 / 500+ / 600 / 2000 with small footprint
30,00 Euro As above, with a ROM with 1 x kickstart and DiagROM 1.30
35,00 Euro 3 way kickswitch, ...

Price Description 15,00 Euro Amiga 2000 CPU Relocator Board, for placement in the Co-Processor slot of the Amiga 2000
27,50 Euro As above, Including onboard IDE interface (HDD / CD-ROM / CF Support)
Amiga 2000 CPU Relocator Board ...

Read More

Price Description 4,00 Euro 10 CM Floppy Disk cable with Crimp connectors (Female / Female) 4,50 Euro 15 CM Floppy Disk cable with Crimp connectors (Female / Female) 5,00 Euro 20 CM Floppy Disk cable with Crimp connectors (Female / ...

Price Description 22,00 Euro Amiga Switchless Bootselector Deluxe Version !, switch easily between bootdrives by using the Amiga Keyboard.
Amiga Switchless Bootselector Deluxe Version The boot selector turns your external disk drive / gotek into your df0: (your ...

Price Description 30,00 Euro Amiga 500 external 2MB Fast RAM expansion (Expansion port)
38,00 Euro As above, including patched Kickstart 1.3 or 3.1 on adapter board(+4 euro for Rev. 5 and lower) (Proof of owning the Original ROM required , ...

Read More

Price Description 65,00 Euro External Floppydrive for the Amiga incl. case and external interface with 25 cm floppy and power cable. 25,00 Euro Amiga External Interface with 25 cm floppy and power cable for connecting a PC Floppydrive. 15,00 Euro ...

Price Description 2,50 Euro Screw set Amiga 1200
Screw set Amiga 1200 If you buy a second-hand Commodore Amiga 1200 nowadays , there is a good chance that screws are missing or have been replaced by screws that do ...

Price Description 2,50 Euro Screw set Amiga 500
Screw set Amiga 500 If you buy a second-hand Commodore Amiga 500 nowadays , there is a good chance that screws are missing or have been replaced by screws that do ...

Price Description 60,00 Euro Amiga 2000 IDE / 2MB RAM / Kick3.1+ (Upgrade Kit), for placement in the Co-Processor slot of the Amiga 2000
Amiga 2000 IDE / 2MB RAM / Kick3.1+ (Upgrade Kit) for the A2000 I ...

Prijs Omschrijving 9,00 Euro 256 MB Compact Flash kaart (Sandisk / industrial)
15,00 Euro 512 MB Compact Flash kaart (Sandisk)
256MB Compact Flash Card: Do you have an Amiga or Atari with an IDE / ATA connection and do ...

Price Description 62,50 Euro Amiga 2000 Gotek internal with 0.96 Oled, buzzer and Rotary Encoder for the A2000. The mounting is quite simple and fits exactly in a 3.5 inch opening of the Amiga 2000 Version : Oled 0.96″ display, ...

Read More

Price : 15.00 euros Description : Buffered Amiga BootSelector for the A500 / 2000  (Boot Device choice by means of Jumper or Switch with +/- 20 cm connection cable. Buffered Amiga Boot Selector for the A500 / 2000.

The ...

Price : 17.50 euros 30.00 euros Description : Buffered OpenKickstart Switch for the Amiga 500/600/2000 Including switch with +/- 20 cm connection cable. As above with a rom with 1 kickstart and a Diagrom 1.21 for Amiga 500 (plus) / ...

Prijs : 4.99 euros (for 4 pieces) Parts : ThroughHole , SMD (SOJ 26/20)
Difficulty : 2 PCB_SOJ26 to DIP20 adapter (Left and right hand bearing): These PCBs are my own design, I had been looking for a PCB ...

Price : 19.95 euros Description : No Longer Available ! Used, but in good condition DB23 - (6 pin) DIN genuine Commodore video cable for the Amiga. Amiga DB-23 to DIN RGB Video Cable This is a used, tested ...

Price Description Sold out ! Used, but in good condition DB23 - (6 pin) DB9 Genuine Commodore video cable for the Amiga.
Amiga DB-23 to DB-9 RGB Video Cable This is a used, tested and genuine Commodore Amiga ...

Price Description 17,50 Euro Amiga L-shape Kickstart Switch for the Amiga 500 Rev. 5 Including switch with +/- 20 cm connection cable.
Amiga L-shape Kickstart Switch This Amiga L-shape Kickstart Switch is designed by me for a ...

Price Description 17,50 Euro Amiga Kickstart Switch for the A500 / 500+ / 600 / 2000 with a smal footprint. Includes switch with +/- 20 cm connection cable. Amiga Kickstart switch This interface was designed by me and is ...

Price Description 6,00 Euro 10 CM Floppy Extension Cable with Crimp connectors (Male / Female)
7,00 Euro 15 CM Floppy Extension Cable with Crimp connectors (Male / Female)
good quality 34 Pin floppy extension cables (in the colors ...

Read More

Price Description 25,00 Euro Premium OFC RGB Scart cable for the Commodore Amiga with gold plated contacts and metal Scart plug.
No Longer Available ! This  Amiga RGB Scart Cable has the following properties:

• length of +/- ...
  Read More

Price Description 7,00 Euro IDE-2-CF Compact Flash Adapter (40 Pin, Male, Vertical) Connect to a mainboard or IDE controller with a 40 pin IDE cable IDE-2-CF Adapter: Do you have an Amiga or Atari with an IDE / ATA ...

Price Description 9,00 Euro IDE-2-CF Compact Flash Slot Adapter (40 Pin, Male, External) Connect to a mainboard or IDE controller with a 40 pin IDE cable IDE-2-CF Adapter : Do you have an Amiga or Atari with an IDE/ATA ...

Price Description 4,00 Euro 44 PIN IDE cable, 5 CM with Crimp connectors (Female / Female) 7,00 Euro As above , 20 CM length 8,00 Euro As above , 30 CM length 9,00 Euro As above , 40 CM length
...

Price Description 15,00 Euro Adapter for connecting a Sega Megadrive D-pad Controller to your C64 / Amiga
Sega Mega D-pad Adapter for the Commodore 64 and the Amiga A number of different  models of D-pad controllers have been  marketed for ...

Price Description 30,00 Euro Amiga 500 internal 2MB Fast RAM expansion (68000 Socket)
38,00 Euro As above, including patched Kickstart 1.3 or 3.1 on adapter board(+4 euro for Rev. 5 and lower) (Proof of owning the Original ROM required , ...

Read More

Price Description 27,50 Euro Amiga 500 / 500+ / 2000 IDE Interface (68000 socket), with Vertical (standing) 40 pin connector 47,50 Euro Kit, As above, with directly connected IDE-2-CF adapter and pre-installed 256MB CF card 57,50 Euro Kit, As above, with IDE-2-CF slot ...

Price Description 27,50 Euro Amiga 500 / 500+ IDE Interface Horizontal (68000 Socket) with horizontal (laying) 40 pin connector 47,50 Euro Amiga 500 / 500+ IDE Interface Horizontal kit, with IDE-2-CF adapter and pre-installed 256MB CF card Amiga ...

Read More

Price Description 27,50 Euro Amiga 2000 IDE Interface (Coprocessor Slot) 40 pin version 50,00 Euro Kit, As above, with directly connected IDE-2-CF adapter and pre-installed 256MB CF card 60,00 Euro Kit, As above, with IDE-2-CF slot adapter, 40CM IDE/Power cable and pre-installed 256MB ...

Price : 19,00 euros 22,50 euros Description : Amiga Switchless Boot Selector DF0: - DF1: , switch between boot drives using the Amiga Keyboard. Deluxe Amiga Switchless Boot Selector, allows to set fixed default bootdrive at power up ...

Price : 16.95 euros Description : Amiga RGB Scart cable for the Commodore Amiga family of Computers Hooking up your Amiga to a RGB Capable monitor with this RGB Scart lead will give you the optimal picture quality ...

Price : Open to any offer Description : Amiga 2000 for sale, 3 MB memory, Kickstart 3.1+, With IDE, CF and DVD-ROM My Amiga 2000 is for sale : My Development / Test machine can go to a ...

Price Description 47,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 500 / 500+.
Assembly is simple and can be done without drilling or modifying the Amiga or Gotek. Version : ...

Read More

Price : Open to any offer Description : Amiga 600 For sale, 2 MB Chipram , Kickstart 3.1, With CF-2-IDE adapter and CF harddisk. Amiga 600 for sale  : This amiga 600 is one out of my own ...

Prijs : 2,50 Euro  (Alleen de Led houder)
3,50 Euro  (Led houder inclusief Blauwe LED) Een 3D geprinte Amiga 500 IDE LED Houder. De Amiga 500 IDE LED houder is geprint in PLA+ in een blauwe kleur, en past ...

Price :  10,00 Euro A 3D printed A500 Trapdoor Cover. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover for the Commodore A500 is ...

Price :  10,00 Euro A 3D printed A500 Ventilated Trapdoor lid. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor lid with ventilation slots for the ...

Price :  10,00 Euro A 3D printed A600 Ventilated Trapdoor lid (Creme coloured). The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor lid with ventilation ...

Price :  10,00 Euro A 3D printed A600 Trapdoor Cover. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover for the Commodore A600 is ...

Price :  10,00 Euro A 3D printed A1200 Ventilated Trapdoor member. The lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover with honeycomb vents for ...

Price :  10,00 Euro A 3D printed A1200 Trapdoor cover for the Amiga 1200.  The Trapdoor lid is printed in PLA + in a color that is quite close to an original non-discolored Amiga 500.
The Trapdoor cover ...

Price Description 27,50 Euro Amiga A500 / A2000 Internal IDE Interface (IDE Interface only) (Various models) For a complete working system you also need an  IDE 2 Compact Flash Adapter, and a Compact Flash Card.
The picture on the right shows ...

Read More

Price Description 20,00 Euro A complete and assembled TL866 Eprom Adapter, including a 48 pin ZIF Socket. (Also for TL866II - TL866II Plus)
15,00 Euro Like the above, but then as a complete DIY Kit.
This TL866 Eprom Adapter ...

Price Description 30,00 Euro 15Khz VGA Monitor tester, with on/off switch in a newly designed 3D printed housing.
15Khz VGA Monitor Tester, Introduction. If, like me, you would like to have a VGA monitor that supports 15Khz modes ...

Price : 7,00 Euro A 3D printed Amiga 500 Expansion Port Cover. The lid is printed in PLA + in a color that is quite close to an original undiscolored Amiga 500.
The Amiga 500 expansion port cover ...

Prijs Omschrijving 60,00 Euro Externe Gotek Floppydrive in Amiga design met Rotary Encoder, 0.91 Oled display en Buzzer External Gotek in Amiga design with Rotary, 0.91 Oled display and Buzzer why an External Gotek in Amiga design with ...

Price Description 52,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 1200.
Assembly is simple and can be done without drilling or modifying the amiga or Gotek. Version : Oled 0.91″ ...

Read More

Price Description 52,50 Euro This Gotek Floppy Drive Emulator comes with a built-in bracket for internal mounting in an Amiga 600.
Assembly is simple and can be done without drilling or modifying the amiga or Gotek. Version : Oled 0.91″ ...

Read More

Price Description 60,00 Euro Amiga 2000 Gotek internal with 0.91 Oled, buzzer and Rotary Encoder for the A2000. The mounting is quite simple and fits exactly in a 3.5 inch opening of the Amiga 2000 Version : Oled 0.91″ display, ...

Read More

Price Description 65,00 Euro External Gotek in Amiga design with Rotary, 0.96 Oled display and a Buzzer
External Gotek in Amiga design with Rotary, 0.96 Oled display and Buzzer You may wonder why an External Gotek in Amiga ...