Gotek Retro Add-ons And Support - Page 353 Of 37 - New Hardware For Amiga, C64, Atari, MSX

Slider 17 : External IDE Interface for Amiga 500 / 500+

Slider 04 : Varta battery replacement Module

Slider 11 : PS/2 Mouse interface for Amiga / Atari family of Computers

Slider 13 : Atari Bombs Away / SALT Diagnostic Cartridge

Slider 10 : Amiga External Gotek Interface / Internal PC Floppy interface

Slider 08 : CupCake Cartridge for the Commodore 64

Slider 22 : Atari SNAP! USB Power Cartridge / Internal Floppy Twist Interface

Slider 01 : Black Gotek Floppy Drive with Rotary Encoder

Slider 18 : Expansion port splitter for Amiga 500 / 500+

Slider 12 : Diagnostic Rom V1.21 for Amiga *

Slider 20 : External Gotek Floppydrive in Amiga look, with a 0.96 Oled Display

Slider 23 : Amiga AT BUS Clone IDE Interface

Slider 21 : External Gotek Floppydrive in Atari ST look with a 0.96 Oled Display

Slider 07 : Amiga 500 modern 512KB Memory Expansion

Slider 05 : Bootselectors For Amiga 500 / 600 / 1200 / 2000 / 3000

Slider 06 : Amiga 500 Classic 512KB memory expansions with or without Clock

Slider 19 : Internal Gotek Floppydrive with Oled for the Amiga 500 / 600 / 1200

Slider 03 : Commodore 64 PowerSaver

The Commodore 64 Powersaver protects your C64 against overvoltage problems. In many cases, the old C64 power supplies have to contend with stability problems. This Power saver is ideal to protect your C64 against (too) high voltage.

Slider 17 : External IDE Interface for Amiga 500 / 500+

Easily expand your amiga with an External IDE Interface for Amiga 500 and an IDE-2-CF adapter. That way you can enjoy a lot of storage on your amiga, and you can easily exchange data with, for example, a PC. (Also supports CD/DVD drives) (Comes with a housing in Amiga 500...

Slider 04 : Varta battery replacement Module

Varta battery replacement Module The Amiga has relied heavily on Varta batteries in its career, which turned out to have been a rather disastrous Decision years later. Leaking batteries, corroding motherboards, damaged components beyond repair. Therefore, replace your battery with a Button cell PCB this cell is not recharged but is safe...

Slider 11 : PS/2 Mouse interface for Amiga / Atari family of Computers

PS/2 mouse interface This interface is plugged into your Amiga or Atari via a DB 9 plug, the PS/2 mouse is plugged into the PS/2 connector on the other side of the interface. (Compatible with all Amigas and Atari ST / TT / Falcon).

Slider 15 : Tapecart SD for the C64

The Tapecart SD for the Commodore 64 This device combines unbelievable loading speed with (almost) unlimited storage capacity. Storage on an SD card, faster than almost any solution out there for the C64

Slider 13 : Atari Bombs Away / SALT Diagnostic Cartridge

Atari Bombs Away / SALT Diagnostic Cartridge : The Bombs Away Cartridge allows you to have your Atari ST (STe / TT / Mega ST) undergo some extensive Diagnostic testing. The Salt Diagnostics Cartridge is meant for testing the Atari 8 Bit family of computers

Slider 10 : Amiga External Gotek Interface / Internal PC Floppy interface

Gotek external Interface The Gotek external interface allows you to use a Gotek externally on your Commodore Amiga. The Internal PC Floppy interface allows you to use a Unmodified PC floppy as internal Amiga Floppydrive.

Slider 08 : CupCake Cartridge for the Commodore 64

The CupCake cartridge Makes that you immediately have your favorite programs at hand when you switch on your Commodore 64/128. Just turn on your C64 and you immediately have a menu with the programs available in the Cupcake Cart.

Slider 22 : Atari SNAP! USB Power Cartridge / Internal Floppy Twist Interface

Atari SNAP! USB Power Cartridge / Internal Floppy Twist Interface The SNAP! Cartridge provides you with 2 USB ports for powering devices like a Gotek or UltraSatan (NO DATA) The Atari Swap interface makes it easy to replace the internal floppy of an ST, it rotates and extends the Floppy...

Slider 01 : Black Gotek Floppy Drive with Rotary Encoder

This Black Gotek is equipped with an extra Rotary encoder. This makes it possible to quickly scroll up or down by turning the Rotary knob. Scrolling through dozens of images on the USB stick becomes very easy.

Slider 18 : Expansion port splitter for Amiga 500 / 500+

Connect 2 external devices with the use of this Expansion port splitter for Amiga 500. By using the expansionport splitter , you can use your Action Replay in addition to your external hard drive. Available as 2 x Horizontal, or as 1 x Horizontal and 1 x Vertical

Slider 12 : Diagnostic Rom V1.21 for Amiga *

Amiga DiagRom 1.21 by John Hertell, 16 Bit, Single Rom for Amiga 500/500 Plus, 600 and 2000 Replace the kickstart ROM in your Amiga with this Diagnostic ROM and you can run your Amiga through a self-test program. Even Amigas that no longer display an image can still generate a test...

Slider 20 : External Gotek Floppydrive in Amiga look, with a 0.96 Oled Display

External Gotek Floppydrive in Amiga look, with a 0.96 Oled Display External Gotek Floppydrive with a 0.96 Oled Display, Rotary Encoder and a Buzzer. Comes with a special case design alike the wedge models Amiga (Available in Beige or White)

Slider 23 : Amiga AT BUS Clone IDE Interface

Amiga AT BUS Clone IDE Interface The Amiga AT-BUS IDE Interface ( Alfa Data Clone ) in a slightly modified version. Now with a Slot guide so that reversed placement is almost impossible to be done unconsciously. Original Design Matze - A1k.org

Slider 21 : External Gotek Floppydrive in Atari ST look with a 0.96 Oled Display

External Gotek Floppydrive in Atari ST look, with a 0.96 Oled Display External Gotek Floppydrive with a 0.96 Oled Display, Rotary Encoder and a Buzzer. Comes with a special case design somewhat inspired by the Atari SF314 external Floppydrive.

Slider 07 : Amiga 500 modern 512KB Memory Expansion

This 512KB Memory Expansion is a modern variant of the old memory expansions that were available for the Amiga 500 at the time. The basis for this memory expansion is a single EDO ram building block, a lot more modern and energy efficient than the models of yesteryear.

Slider 14 : Open Kickstart / Low Profile Kickstart Switch for Amiga 500/600/2000

The Open Kickstart interface is designed by SukkoPera and is buffered, intended for the Amigas of the type 500 / 500+ / 600 / 2000. The Low profile kickstart switch is especially for those modelss that need a lower profile (A500 Rev. 6a) or because there is additional hardware giving...

Slider 05 : Bootselectors For Amiga 500 / 600 / 1200 / 2000 / 3000

Various boot selectors for the various types of Amiga Computers, both with switch and switchless. DF0: -DF1: for Amiga 500, DF0:-Df2: for Amiga 2000 / 3000 and Df0:-DF1: for Amiga 1200 / 600

Slider 06 : Amiga 500 Classic 512KB memory expansions with or without Clock

this 512KB Memory Expansion is based on the classic Commodore model, the A501. A free interpretation of the A501memory Expansion , with socketed chips for the Amiga 500. (2 different models available, with or without Clock Functionality).

Slider 19 : Internal Gotek Floppydrive with Oled for the Amiga 500 / 600 / 1200

Internal Gotek Floppydrive with Oled for the Amiga 500 / 600 / 1200 These Goteks have a special designed diskbracket that makes installing a Gotek into your amiga an easy task. No need to modify your precious Amiga , this is a 1 on 1 replacement.

Synth : Akai Synths & Samplers

May 25, 2020 December 31, 2023Synth

Gotek support [Yamaha] [Sequential] [Kurzweil] [Korg] [Kawai] [GEM] [Ensonic] [Akai] [E-mu] [Casio] [Roland]

Akai Synth & Samplers This is a list of Akai Synths & samplers that have been confirmed that they should work with a Gotek Floppydrive Emulator with Flashfloppy Firmware, this list is not complete. If the model you have is not (yet) listed , does not mean it will not…

Besides Gotek Floppydrive emulators you can also find a lot of other Retro add-ons (Memory Expansions, Gotek External Interfaces, IDE Interfaces, Kickstart switches en Bootselectors) for Amiga, Atari, MSX and other computers.