Gotek Retro Add-ons And Support - Page 344 Of 37 - New Hardware For Amiga, C64, Atari, MSX

Slider 04 : Varta battery replacement Module

Slider 23 : Amiga AT BUS Clone IDE Interface

Slider 13 : Atari Bombs Away / SALT Diagnostic Cartridge

Slider 05 : Bootselectors For Amiga 500 / 600 / 1200 / 2000 / 3000

Slider 16 : Internal 44pin CF / DOM IDE interface for Amiga 500 / 500+ / 2000

Slider 12 : Diagnostic Rom V1.21 for Amiga *

Slider 10 : Amiga External Gotek Interface / Internal PC Floppy interface

Slider 17 : External IDE Interface for Amiga 500 / 500+

Slider 02 : Gray Gotek Floppy Drive with Rotary Encoder

Slider 20 : External Gotek Floppydrive in Amiga look, with a 0.96 Oled Display

Slider 07 : Amiga 500 modern 512KB Memory Expansion

Slider 09 : Epyx Fastload Cartridge for the Commodore 64 (Repro)

Slider 06 : Amiga 500 Classic 512KB memory expansions with or without Clock

Slider 11 : PS/2 Mouse interface for Amiga / Atari family of Computers

Slider 22 : Atari SNAP! USB Power Cartridge / Internal Floppy Twist Interface

Slider 08 : CupCake Cartridge for the Commodore 64

Slider 21 : External Gotek Floppydrive in Atari ST look with a 0.96 Oled Display

Slider 03 : Commodore 64 PowerSaver

The Commodore 64 Powersaver protects your C64 against overvoltage problems. In many cases, the old C64 power supplies have to contend with stability problems. This Power saver is ideal to protect your C64 against (too) high voltage.

Slider 04 : Varta battery replacement Module

Varta battery replacement Module The Amiga has relied heavily on Varta batteries in its career, which turned out to have been a rather disastrous Decision years later. Leaking batteries, corroding motherboards, damaged components beyond repair. Therefore, replace your battery with a Button cell PCB this cell is not recharged but is safe...

Slider 23 : Amiga AT BUS Clone IDE Interface

Amiga AT BUS Clone IDE Interface The Amiga AT-BUS IDE Interface ( Alfa Data Clone ) in a slightly modified version. Now with a Slot guide so that reversed placement is almost impossible to be done unconsciously. Original Design Matze - A1k.org

Slider 13 : Atari Bombs Away / SALT Diagnostic Cartridge

Atari Bombs Away / SALT Diagnostic Cartridge : The Bombs Away Cartridge allows you to have your Atari ST (STe / TT / Mega ST) undergo some extensive Diagnostic testing. The Salt Diagnostics Cartridge is meant for testing the Atari 8 Bit family of computers

Slider 05 : Bootselectors For Amiga 500 / 600 / 1200 / 2000 / 3000

Various boot selectors for the various types of Amiga Computers, both with switch and switchless. DF0: -DF1: for Amiga 500, DF0:-Df2: for Amiga 2000 / 3000 and Df0:-DF1: for Amiga 1200 / 600

Slider 16 : Internal 44pin CF / DOM IDE interface for Amiga 500 / 500+ / 2000

Easily expand your amiga with an IDE Interface and an IDE-2-CF adapter. Available as interface with CF adapter and CF card. Also available as a specially designed interface for the use with a DOM module

Slider 12 : Diagnostic Rom V1.21 for Amiga *

Amiga DiagRom 1.21 by John Hertell, 16 Bit, Single Rom for Amiga 500/500 Plus, 600 and 2000 Replace the kickstart ROM in your Amiga with this Diagnostic ROM and you can run your Amiga through a self-test program. Even Amigas that no longer display an image can still generate a test...

Slider 10 : Amiga External Gotek Interface / Internal PC Floppy interface

Gotek external Interface The Gotek external interface allows you to use a Gotek externally on your Commodore Amiga. The Internal PC Floppy interface allows you to use a Unmodified PC floppy as internal Amiga Floppydrive.

Slider 17 : External IDE Interface for Amiga 500 / 500+

Easily expand your amiga with an External IDE Interface for Amiga 500 and an IDE-2-CF adapter. That way you can enjoy a lot of storage on your amiga, and you can easily exchange data with, for example, a PC. (Also supports CD/DVD drives) (Comes with a housing in Amiga 500...

Slider 02 : Gray Gotek Floppy Drive with Rotary Encoder

Gotek Floppy Drive with Rotary Encoder The rotary encoder has another handy feature besides scrolling through images: By pressing the rotary button, a virtual floppy disk can be loaded or ejected. The Load / Eject Function is only available on Gotek drives with a Rotary Encoder.

Slider 14 : Open Kickstart / Low Profile Kickstart Switch for Amiga 500/600/2000

The Open Kickstart interface is designed by SukkoPera and is buffered, intended for the Amigas of the type 500 / 500+ / 600 / 2000. The Low profile kickstart switch is especially for those modelss that need a lower profile (A500 Rev. 6a) or because there is additional hardware giving...

Slider 20 : External Gotek Floppydrive in Amiga look, with a 0.96 Oled Display

External Gotek Floppydrive in Amiga look, with a 0.96 Oled Display External Gotek Floppydrive with a 0.96 Oled Display, Rotary Encoder and a Buzzer. Comes with a special case design alike the wedge models Amiga (Available in Beige or White)

Slider 15 : Tapecart SD for the C64

The Tapecart SD for the Commodore 64 This device combines unbelievable loading speed with (almost) unlimited storage capacity. Storage on an SD card, faster than almost any solution out there for the C64

Slider 07 : Amiga 500 modern 512KB Memory Expansion

This 512KB Memory Expansion is a modern variant of the old memory expansions that were available for the Amiga 500 at the time. The basis for this memory expansion is a single EDO ram building block, a lot more modern and energy efficient than the models of yesteryear.

Slider 09 : Epyx Fastload Cartridge for the Commodore 64 (Repro)

Speed up disk access with the Epyx Fastload Cartridge , for the Commodore 64 / 128 Average load speeds overview: Normal C64 Load time: 500 bytes per second Epyx Fastload (SD2IEC): 8000 bytes per second

Slider 06 : Amiga 500 Classic 512KB memory expansions with or without Clock

this 512KB Memory Expansion is based on the classic Commodore model, the A501. A free interpretation of the A501memory Expansion , with socketed chips for the Amiga 500. (2 different models available, with or without Clock Functionality).

Slider 11 : PS/2 Mouse interface for Amiga / Atari family of Computers

PS/2 mouse interface This interface is plugged into your Amiga or Atari via a DB 9 plug, the PS/2 mouse is plugged into the PS/2 connector on the other side of the interface. (Compatible with all Amigas and Atari ST / TT / Falcon).

Slider 22 : Atari SNAP! USB Power Cartridge / Internal Floppy Twist Interface

Atari SNAP! USB Power Cartridge / Internal Floppy Twist Interface The SNAP! Cartridge provides you with 2 USB ports for powering devices like a Gotek or UltraSatan (NO DATA) The Atari Swap interface makes it easy to replace the internal floppy of an ST, it rotates and extends the Floppy...

Slider 08 : CupCake Cartridge for the Commodore 64

The CupCake cartridge Makes that you immediately have your favorite programs at hand when you switch on your Commodore 64/128. Just turn on your C64 and you immediately have a menu with the programs available in the Cupcake Cart.

Slider 21 : External Gotek Floppydrive in Atari ST look with a 0.96 Oled Display

External Gotek Floppydrive in Atari ST look, with a 0.96 Oled Display External Gotek Floppydrive with a 0.96 Oled Display, Rotary Encoder and a Buzzer. Comes with a special case design somewhat inspired by the Atari SF314 external Floppydrive.

Synth : Sequential Circuits

May 25, 2020 December 31, 2023Synth

Gotek support [Yamaha] [Sequential] [Kurzweil] [Korg] [Kawai] [GEM] [Ensonic] [Akai] [E-mu] [Casio] [Roland]

Sequential Circuits Deze lijst van Sequential Circuits Synths waarvan bevestigd is dat ze werken met een Gotek Floppydrive Emulator is niet compleet. Staat jouw model Sequential Circuits synthesizer er (nog) niet bij, dan wil dat nog niet altijd zeggen dat hij niet samen met een Gotek Floppydrive werkt !! Sequential…

Besides Gotek Floppydrive emulators you can also find a lot of other Retro add-ons (Memory Expansions, Gotek External Interfaces, IDE Interfaces, Kickstart switches en Bootselectors) for Amiga, Atari, MSX and other computers.