Price Description 17,50 Euro VgaST , the Atari ST-2-VGA Adapter, allows you to use a VGA Monitor on the Atari ST. VgaST , the Atari ST-2-VGA Adapter, history : It’s been over 2 years since I designed this interface for the Atari ST , but I didn’t see any real…
Price Description 30,00 Euro Atari Video Mode Monitor Tester, 4 modes, with on/off switch in a 3D printed casing. Atari Video Mode Monitor Tester, Introduction. If you have a monitor in mind, but you have no idea if it supports the Atari Native modes , you can generate a number…
Price Description 30,00 Euro 15Khz VGA Monitor tester, with on/off switch in a newly designed 3D printed housing. 15Khz VGA Monitor Tester, Introduction. If, like me, you would like to have a VGA monitor that supports 15Khz modes (OA Amiga and Atari) then you can generate a test image at…
Price Description 25,00 Euro Atari Diagnostics Cartridge SALT 400 / 600 / 800 / 800XL / 65XE / 130XE / 800XE (Rev. 1.01) including cartridge housing Atari Diagnostics Cartridge SALT v1.01. This cartridge is one with 4 banks of 16 KB in a single Cartridge, where the banks are switched…
Price Description 25,00 Euro Gotek External Interface for the Atari ST (and the rest of the Family) Deluxe model (Mini USB OR DC Jack) 15,00 Euro SNAP!! USB Power Cartridge for the Atari ST, for the Gotek External Interface with Mini USB. 5,00 Euro 5 volt power supply with Jack…
Price Description 5,00 Euro 10 CM S0 pin SCSI cable with 2 Crimp connectors 6,00 Euro 20 CM S0 pin SCSI cable with 2 Crimp connectors 7,00 Euro 30 CM S0 pin SCSI cable with 2 Crimp connectors Good quality 50 pin SCSI Cables (F / F) with strain relief…
Price Description 15,00 Euro Set of 2 Atari Mega Maskrom Adapters, for upgrading your TOS to EmuTOS 121 or Rainbow TOS (1.4) by using standard EPROMS 25,00 Euro Set of 2 Atari Mega Maskrom Adapters, including EmuTOS 1.3 or KaosTOS or Rainbow TOS (1.4) on 2 ROMs Atari Mega Maskrom…
Price Description 65,00 Euros External Gotek in Atari ST design with 0.96 Oled display, Rotary and Buzzer External Gotek in Atari ST design with 0.96 Oled display, Rotary and Buzzer You may wonder why an External Gotek in Atari ST design with 0.96 Oled display, Rotary and Buzzer… Me too…
Price Description 7,00 Euro Composite cable with a 5-pin DIN plug on one side and 3 RCA (Cinch) plugs on the other side, for the Commodore 64 This cable can also be used for most of the Atari 8bit machines Composite cable (Din5 – Tulip) for the Commodore 64 /…
Price Description 6,00 Euro DSUB DB 19 Male Connector (Connector only). 8,50 Euro DSUB DB 19 Male Connector (Connector and shell) DSUB DB 19 Connector and Shell (introduction) The DSUB DB 19 Connector and Shell are very hard to get nowadays, and if you are lucky to find oneĀ chances…