Shop : Amiga 500 / 500+ IDE Interface 44pin (68000 Socket)

Price :

25,00 euro

45,00 euro

Description :

Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) with horizontal (Laying) 44 pin connector

Amiga 500 / 500+ IDE Interface 44pin kit, with directly attached IDE-2-CF adapter and pre-installed 256MB CF card

Amiga 500 / 500+ IDE Interface 44pin (68000 Socket)

Amiga 500 / 500+ IDE Interface 44pin (68000 Socket)

Amiga 500 / 500+ IDE Interface 44pin (68000 Socket)

This is a  44 pin IDE version designed to directly connect an IDE-2-CF Adapter without cables.
This way you have an interface that supplies the voltage directly via the 44 pin connector (can be switched off).
This interface can therefore be mounted completely without cables, and fits in every Amiga 500 / 500+.

Option Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) :

What is the difference with the other adapters already available ?

- 44 pin IDE connector
- Direct power supply via the IDE connector
- No cables (no power and no IDE) if the correct IDE-2-CF is used.
- Low profile (fits in any A500)
- Green 🙂

Notes for Amiga 500 / 500+ IDE Interface 44pin (68000 Socket) :

1 ]    This card will not work with trapdoor memory larger than 512KB

2 ]    This card also works with hard disks, they just can't be powered from the IDE Interface itself.

3 ]    This card can work with Fat95 or Amiga FFS formatted CF cards, each filesystem uses its own bootdisk. (Both bootdisks can be found in the  Download  Section)

4 ]    The disadvantage of this option is that for exchanging data eg with a PC , the amiga has to be disassembled to get to the Compact Flash, so as a hard disk it is an excellent solution as intermediate media it is better to use an external IDE / ATAPI interface.

Comments are closed.